Baxter Institute - Melbourne - Fabrication Courses (International Students)

Fabrication Courses – International Students

Certificate III in Engineering – Fabrication Trade

fabrication_courses_melbourne_001

Location 201 Arden St, North Melbourne,
VIC, 3051
Course Code MEM30305
Training Product Status Current
Training Product Release date 16/03/2012
CRICOS Code 069786B
Intakes Weekly
Total Tuition Hours
1000 hours
Delivery Mode
Face-to-face
Assessment Mode
Combination of theory, practical and/or project assessments
Fees* Refer to “Course Fees
Prerequisite Not Applicable
Admission Direct Entry Requirements IELTS 5.5 or equivalent Completion of Year 11 (Aus) or equivalent¹

Training.gov.au is the national register which states the currency of any training product

Enquire NowCourse DescriptionDurationUnits of CompetencyPathway to Further Study

Contact Details

 

Academic Achievements

 

Study at Baxter Institute

 

Questions and comments

 

Privacy Statement

  • The information you give us will be collected and used to respond to your enquiries and provide you with information about related courses. Information may be disclosed to relevant staff to respond to your request and in accordance with the law.
 
This qualification covers the skills and knowledge required for employment as an Engineering Tradesperson – Fabrication within the metal, engineering, manufacturing and associated industries or other industries where Engineering Tradespersons – Fabrication work. The Certificate III in Engineering – Fabrication Trade specifies the competencies required for employment as a qualified welder and fabricator. Employment outcomes related to this qualification are found in a wide variety of manufacturing and engineering related sectors.

Tuition Weeks: 50 weeks
CRICOS Duration: 62 weeks incl. holidays

CORE:
MEM13014A Apply principles of occupational health and safety in the work environment
MEM16008A Interact with computing technology
MEM12024A Perform computations
MEM12023A Perform engineering measurements
MSAENV272B Participate in environmentally sustainable work practices
MEM15002A Apply quality systems
MEM15024A Apply quality procedures
MEM14004A Plan to undertake a routine task
MEM14005A Plan a complete activity
MEM17003A Assist in the provision of on the job training
MEM16006A Organise and communicate information
MEM16007A Work with others in a manufacturing, engineering or related environment
ELECTIVE:
MEM11011B Undertake manual handling
MEM05052A Apply safe welding practices
MEM18001C Use hand tools
MEM18002B Use power tools/hand held operations
MEM03003B Perform sheet and plate assembly
MEM09002B Interpret technical drawing
MEM05005B Carry out mechanical cutting
MEM05051A Select welding processes
MEM05004C Perform routine oxy acetylene welding
MEM05006C Perform brazing and/or silver soldering
MEM05007C Perform manual heating and thermal cutting
MEM05008C Perform Advanced manual thermal cutting, gouging and shaping
MEM05014C Monitor quality of production welding/fabrications
MEM24001B Perform basic penetrant testing
MEM05012C Perform routine manual metal arc welding
MEM05015D Weld using manual metal arc welding process
MEM05016C Perform Advanced welding using manual metal arc welding process
MEM05050B Perform routine gas metal arc welding
MEM05017D Weld using gas metal arc welding process
MEM05018C Perform Advanced welding using gas metal arc welding process
MEM12007D Mark off/out structural fabrications and shapes
MEM05047B Weld using flux core arc welding process
MEM05048B Perform Advanced welding using flux core arc welding process
MEM11016B Order materials
MEM05049B Perform routine gas tungsten arc welding
MEM05019D Weld using gas tungsten arc welding process
MEM05013C Perform manual production welding
MEM40105 Certificate IV in Engineering
^MEM50105 Diploma of Engineering
- Advanced Trade or other relevant qualifications

 

Certificate IV in Engineering

fabrication_courses_melbourne_002

Location 201 Arden St, North Melbourne,
VIC, 3051
Course Code MEM40105
Training Product Status Current
Training Product Release date 15/09/2013
CRICOS Code 072114E
Intakes Weekly
Total Tuition Hours
1360 hours
Delivery Mode
Face-to-face
Assessment Mode
Combination of theory, practical and/or project assessments
Fees* Refer to “Course Fees
Prerequisite Not Applicable
Admission Direct Entry Requirements IELTS 5.5 or equivalent Completion of Year 11 (Aus) or equivalent¹

Training.gov.au is the national register which states the currency of any training product

Enquire NowCourse DescriptionDurationUnits of CompetencyPathway to Further Study

Contact Details

 

Academic Achievements

 

Study at Baxter Institute

 

Questions and comments

 

Privacy Statement

  • The information you give us will be collected and used to respond to your enquiries and provide you with information about related courses. Information may be disclosed to relevant staff to respond to your request and in accordance with the law.
 
The Certificate IV in Engineering specifies the competencies required for employment as a Higher Engineering Tradesperson or a Special Class Engineering Tradesperson (Mechanical) – Level II, Special Class Engineering Tradesperson (Fabrication) – Level II, Special Class Engineering Tradesperson (Electrical/Electronic) – Level II in mechanical, electrical/electronic or fabrication trade disciplines. Job roles may include the design, assembly, manufacture, installation, modification, testing, fault finding, commissioning, maintenance and service of equipment and machinery, the fabrication of structures and assemblies, manufacture of sheet metal work, as well as use of relevant machinery, equipment and joining techniques. Employment outcomes related to this qualification are found in a wide variety of manufacturing and engineering related sectors.

Tuition Weeks: 68 weeks
CRICOS Duration: 80 weeks incl. holidays

CORE:
MEM13014A Apply principles of occupational health and safety in the work environment
MEM16008A Interact with computing technology
MEM12024A Perform computations
MEM12023A Perform engineering measurements
MSAENV272B Participate in environmentally sustainable work practices
MEM15002A Apply quality systems
MEM15024A Apply quality procedures
MEM14004A Plan to undertake a routine task
MEM14005A Plan a complete activity
MEM17003A Assist in the provision of on the job training
MEM16006A Organise and communicate information
MEM16007A Work with others in a manufacturing, engineering or related environment
ELECTIVE:
MEM11011B Undertake manual handling
MEM05052A Apply safe welding practices
MEM18001C Use hand tools
MEM18002B Use power tools/hand held operations
MEM03003B Perform sheet and plate assembly
MEM09002B Interpret technical drawing
MEM05005B Carry out mechanical cutting
MEM05051A Select welding processes
MEM05004C Perform routine oxy acetylene welding
MEM05006C Perform brazing and/or silver soldering
MEM05007C Perform manual heating and thermal cutting
MEM05008C Perform Advanced manual thermal cutting, gouging and shaping
MEM05014C Monitor quality of production welding/fabrications
MEM24001B Perform basic penetrant testing
MEM05012C Perform routine manual metal arc welding
MEM05015D Weld using manual metal arc welding process
MEM05016C Perform Advanced welding using manual metal arc welding process
MEM05050B Perform routine gas metal arc welding
MEM05017D Weld using gas metal arc welding process
MEM05018C Perform Advanced welding using gas metal arc welding process
MEM12007D Mark off/out structural fabrications and shapes
MEM05047B Weld using flux core arc welding process
MEM05048B Perform Advanced welding using flux core arc welding process
MEM11016B Order materials
MEM05049B Perform routine gas tungsten arc welding
MEM05019D Weld using gas tungsten arc welding process
MEM05013C Perform manual production welding
MEM05037C Perform geometric development
MEM05020C Perform Advanced welding using gas tungsten arc welding process
MEM16012A Interpret technical specifications and manuals
MEM09009C Create 2D drawings using computer aided design system
MEM09010C Create 3D models using computer aided design system
MEM05026C Apply welding principles
MEM05043B Perform welds to code standards using gas metal arc welding process
^MEM50105 Diploma of Engineering
- Advanced Trade or other relevant qualifications.
back to top

 

PACKAGE: CERTIFICATE III IN ENGINEERING – FABRICATION TRADE
+ DIPLOMA OF BUSINESS

Baxter Institute - Fabrication/Engineering Courses - Melbourne

Location 201 Arden St, North Melbourne,
VIC, 3051
Course Code MEM30305 + BSB50207
CRICOS Code 069786B + 069783E
Intakes Weekly
Total Tuition Hours
Delivery Mode Face-to-face
Assessment Mode Combination of theory, practical and/or project assessments
Fees* Refer to “Course Fees
Prerequisite Not Applicable
Admission Direct Entry Requirements IELTS 5.5 or equivalent Completion of Year 11 (Aus) or equivalent¹

Training.gov.au is the national register which states the currency of any training product

Enquire NowCourse DescriptionDurationUnits of CompetencyPathway to Further Study

Contact Details

 

Academic Achievements

 

Study at Baxter Institute

 

Questions and comments

 

Privacy Statement

  • The information you give us will be collected and used to respond to your enquiries and provide you with information about related courses. Information may be disclosed to relevant staff to respond to your request and in accordance with the law.
 
This course package reflects the role of welders in a range of settings and who are seeking to further develop their skills across a wide range of business functions. People who complete this course could advance their study with the Bachelor programs at our affiliated education providers.

See Units of Competency for Certificate III in Engineering Fabrication Trade, and Diploma of Business.
back to top

 

PACKAGE: CERTIFICATE III IN ENGINEERING – FABRICATION TRADE
+ CERTIFICATE IV IN ENGINEERING + DIPLOMA OF BUSINESS

fabrication_courses_melbourne_004

Location 201 Arden St, North Melbourne,
VIC, 3051
Course Code MEM30305 + MEM40105 + BSB50207
CRICOS Code 069786B + 072114E + 069783E
Intakes Weekly
Total Tuition Hours
Delivery Mode Face-to-face
Assessment Mode Combination of theory, practical and/or project assessments
Fees* Refer to “Course Fees
Prerequisite Not Applicable
Admission Direct Entry Requirements IELTS 5.5 or equivalent Completion of Year 11 (Aus) or equivalent¹

Training.gov.au is the national register which states the currency of any training product

Enquire NowCourse DescriptionDurationUnits of CompetencyPathway to Further Study

Contact Details

 

Academic Achievements

 

Study at Baxter Institute

 

Questions and comments

 

Privacy Statement

  • The information you give us will be collected and used to respond to your enquiries and provide you with information about related courses. Information may be disclosed to relevant staff to respond to your request and in accordance with the law.
 
This package course reflects the role of welders with substantial experience in a range of setting and to gain skills and knowledge required for employment as a mechanical and fabrication engineer. Students will further develop their skills across a wide range of business functions. People who complete this course could advance their study with Bachelor programs at our affiliated education providers.

See Units of Competency for Certificate III in Engineering Fabrication Trade, Certificate IV in Engineering and Diploma of Business.
back to top

¹ subject to assessment level of student’s country – not applicable to level 1 & 2 countries.
² mature age applications from level 1 & 2 countries who can demonstrate an ability to undertake the course through our LLN assessment
^ qualifications not offered at Baxter
* tuition fees and other course related fees are not subject to change once a student has enrolled